BUILDER BASE COAT
  1. Prep and etch natural nail. Cleanse.
  2. Apply Luxa Prime.
  3. Apply a layer of Luxa Build over the entire nail. DO NOT CURE.
  4. Apply more Luxa Build to the uncured layer, focusing the bulk of the product in the apex area for strength.
  5. Optional - wipe inhibition layer. File and buff into desired shape.
  6. Apply Luxa Gel Color or Finish with Luxa Shine.
 SCULPT WITH FORMS
  1. Prep and etch natural nail. Cleanse.
  2. Apply Luxa Prime.
  3. Apply a thin layer of Luxa Build. Cure.
  4. Apply form.
  5. Apply Luxa Build focusing on the tip of the natural nail then extending over the form to create desired extension length. Cure.
  6. Carefully remove form.
  7. Structure layer - Apply a layer of Luxa Build over the entire nail and built extension tip. DO NOT CURE.
  8. Apply more Luxa Build to the uncured layer, focusing the bulk of the product in the apex area for strength.
  9. Repeat steps 7 & 8 until desired thickness/shape is created.
  10. Wipe inhibition layer with alcohol.
  11. File and shape.
  12. Apply Luxa Gel Color or Finish with Luxa Shine
SCULPT WITH TIPS
  1. Prep natural nail and apply nail tip with glue.
  2. Etch natural nail and blend nail tip. Cleanse.
  3. Apply Luxa Prime to the natural nail.
  4. Apply a thin layer of Luxa Build over entire nail and tip. Cure.
  5. Structure layer - Apply a layer of Luxa Build over the entire nail and extension tip. DO NOT CURE.
  6. Apply more Luxa Build to the uncured layer, focusing the bulk of the product in the apex area for strength.
  7. Repeat steps 6 & 7 until desired thickness/shape is created.
  8. Wipe inhibition layer with alcohol.
  9. File and shape.
  10. Apply Luxa Gel Color or Finish with Luxa Shine
FILL
  1. Remove gel color or top coat.
  2. Blend down the grow out of Luxa Build.
  3. Prep natural nail. Cleanse.
  4. Apply Luxa Prime to the natural nail.
  5. Apply a thin layer of Luxa Build over entire nail and tip. Cure.
  6. Structure layer - Apply a layer of Luxa Build over the entire nail and extension tip. DO NOT CURE.
  7. Apply more Luxa Build to the uncured layer, focusing the bulk of the product in the apex area for strength.
  8. Repeat steps 6 & 7 until desired thickness/shape is created.
  9. Wipe inhibition layer with alcohol.
  10. File and shape.
  11. Apply Luxa Gel Color or Finish with Luxa Shine