1. Use 1-2 layers of gel color of choice. Cure.
  2. Apply a thin even layer of the Transfer Foil Gel. Cure (LED 30 secs / UV 2 minutes)
  3. Cut foil to desired size, then place on the nail.
  4. Press and rub with even pressure making sure the foil is making contact over the entire nail.
  5. Peel foil back off slowly to check for any areas that might have been missed. If small areas are missed, press foil back into those spots.
  6. Seal with Luxa Base for added protection. Cure.
  7. Finish with Luxa Shine. Cure. 

For additional info, check out our FAQ page.